Order $24.50 or more to qualify for FREE Shipping on eligible items. (Contiguous 48)

Surecrete Eco-Stain - 4 oz (Individual Tester Sample)

Surecrete Eco-Stain - 4 oz (Individual Tester Sample)
Surecrete Eco-Stain - 4 oz (Individual Tester Sample)
Surecrete Eco-Stain - 4 oz (Individual Tester Sample)
Surecrete Eco-Stain - 4 oz (Individual Tester Sample)
Surecrete Eco-Stain - 4 oz (Individual Tester Sample)
Surecrete Eco-Stain - 4 oz (Individual Tester Sample)
Surecrete Eco-Stain - 4 oz (Individual Tester Sample)
Surecrete Eco-Stain - 4 oz (Individual Tester Sample)
Surecrete Eco-Stain - 4 oz (Individual Tester Sample)
Surecrete Eco-Stain - 4 oz (Individual Tester Sample)
Surecrete Eco-Stain - 4 oz (Individual Tester Sample)
Surecrete Eco-Stain - 4 oz (Individual Tester Sample)
Surecrete Eco-Stain - 4 oz (Individual Tester Sample)
Surecrete Eco-Stain - 4 oz (Individual Tester Sample)
Surecrete Eco-Stain - 4 oz (Individual Tester Sample)
Surecrete Eco-Stain - 4 oz (Individual Tester Sample)
Surecrete Eco-Stain - 4 oz (Individual Tester Sample)
Surecrete Eco-Stain - 4 oz (Individual Tester Sample)
Surecrete Eco-Stain - 4 oz (Individual Tester Sample)
Surecrete Eco-Stain - 4 oz (Individual Tester Sample)
Surecrete Eco-Stain - 4 oz (Individual Tester Sample)
Surecrete Eco-Stain - 4 oz (Individual Tester Sample)
Surecrete Eco-Stain - 4 oz (Individual Tester Sample)
Surecrete Eco-Stain - 4 oz (Individual Tester Sample)
Surecrete Eco-Stain - 4 oz (Individual Tester Sample)
Surecrete Eco-Stain - 4 oz (Individual Tester Sample)
Surecrete Eco-Stain - 4 oz (Individual Tester Sample)
Surecrete Eco-Stain - 4 oz (Individual Tester Sample)
Surecrete Eco-Stain - 4 oz (Individual Tester Sample)
Surecrete Eco-Stain - 4 oz (Individual Tester Sample)

About

SureCrete Eco-Stain is a liquid-form concrete water-based stain that puts you head and shoulders above your competition. Unlike most concrete stains commonly used in the decorative concrete market today, Eco-Stain uses an eco-friendly; water-based formula that contains zero VOC’s and has no pungent chemical aroma.

Eco-Stain contains no harmful chemicals acids making it an exciting alternative to traditional reactive acid stains. Since no chemical reaction takes place, there is no extended waiting time for color to reach full development. What you see is what you get.

It can contribute LEED points to your project with its zero VOC formulation and by zero waste water requirements in its application — there is no need for neutralization, cleanup, or mopping.

Since it is not dependent upon alkalinity to create color, cement substitutes will not affect the resulting appearance.

Specs

Instructions

Surface Preparation

The principles for surface preparation for Eco-Stain are aligned with other coloring agents for cement-based products; the substrate must be:

  1. Clean: The surface must be free of dust, dirt, oil, grease, paints, glues, sealers, curing agents, stamp tool releases, efflorescence, chemical contaminants, rust, algae, mildew and other foreign matter that may prevent proper adhesion. Customarily Super Concrete Renovator (SCR) is appropriate for cleaning. Refer to the TDS for SCR. Some cleaning may require other measures that should be evaluated (e.g. grinding, shot blasting).
  2. Cured: Although Eco-Stain may color cement based products that are not cured, final color may not be realized until 14 – 28 days.
  3. Sound: No system should be placed on concrete or overlays that are flaking or spalling.
  4. Profiled: Not normally required, as SCR is utilized in cleaning.

Note: Eco-Prime is required on substrates are excessively porous, poorly finished, broomed, or very old and absorbent. Eco-Stain will penetrate these unprimed surfaces so deeply that little color will be visible.

Application

Mixing and handling

  1. Eco-Stain’s specialized pigments will settle. Always shake container to mix thoroughly.
  2. Dilute with water to any desired strength, usually between no water dilution to approximately 4 parts water to 1 part Eco-Stain (4:1).
  3. Mask all areas requiring protection. Be certain to mask to an ample height, especially if spraying.

Accenting / Coloring

Due to Eco-Stain's extreme versatility, there are many methods of application, all of which can be combined and altered to suit your needs. The applicator has enormous latitude in selecting methods, particularly since Eco-Stain is non-hazardous.

Common methods include:

  1. Spraying with a pump-up sprayer - Utilize a cone tip and keep sprayer wand in a circular motion to avoid “tracking.”
  2. Brushing or brooming – While Eco-Stain is still wet, brush surface in a random fashion to prevent patterned streaking.
  3. Ragging, sponging, mopping – Usually employed for layering an additional color or spot accenting.
  4. Painter’s airless sprayer – Especially useful in covering large areas.
  5. HVLP or gravity cup sprayer – Precisely places material, utilized with XS products and accenting smaller areas.

Applying multiple coats is optional. Supplementary colors may be combined at desired rates.

Slip Resistance

Eco-Stain alone does not affect slip resistance, but the sealer selected to finish the project will influence this matter: Two recognized US agencies have issued directives on minimum coefficient of friction, OSHA (Occupational Safety and Health Administration) and Department of Justice through the ADA (Americans with Disabilities Act). ADA is the more stringent of the two. ADA directs that accessible walkways have a minimum coefficient of friction of 0.6. Ramps have been directed to be 0.8. The applicator assumes the responsibility to meet these standards. Especially exterior surfaces or surfaces that may become wet, oily, or greasy require attention. Refer to SureGrip Additive TDS and its accompanying coefficient of friction table.

Suitability Sample

Always prepare an adequate number of on-site test areas on the intended substrate to establish aesthetic suitability for products’ intended use.

Clean-up

Eco-Stain can be cleaned up with water.

Full instructions See More

Surecrete Eco-Stain - 4 oz (Individual Tester Sample)

Quantity must be 1 or more
Color
Regular price
$10.95
Sale price
$10.95

Test Surecrete Eco-stain colors on your concrete before finalizing your choice with economical, ready-to-use,  pre-diluted samples. 

Color Group Value Bundles: 4 oz Eco-Stain tester kits available here!

  • Convenient 4 oz size for color testing and sample preparation
  • Zero VOCs, safe around plants and animals
  • UV stable and resistant to fading
  • Available in 29 vibrant colors
  • Perfect for interior and exterior projects

About

SureCrete Eco-Stain is a liquid-form concrete water-based stain that puts you head and shoulders above your competition. Unlike most concrete stains commonly used in the decorative concrete market today, Eco-Stain uses an eco-friendly; water-based formula that contains zero VOC’s and has no pungent chemical aroma.

Eco-Stain contains no harmful chemicals acids making it an exciting alternative to traditional reactive acid stains. Since no chemical reaction takes place, there is no extended waiting time for color to reach full development. What you see is what you get.

It can contribute LEED points to your project with its zero VOC formulation and by zero waste water requirements in its application — there is no need for neutralization, cleanup, or mopping.

Since it is not dependent upon alkalinity to create color, cement substitutes will not affect the resulting appearance.

Specs

Instructions

Surface Preparation

The principles for surface preparation for Eco-Stain are aligned with other coloring agents for cement-based products; the substrate must be:

  1. Clean: The surface must be free of dust, dirt, oil, grease, paints, glues, sealers, curing agents, stamp tool releases, efflorescence, chemical contaminants, rust, algae, mildew and other foreign matter that may prevent proper adhesion. Customarily Super Concrete Renovator (SCR) is appropriate for cleaning. Refer to the TDS for SCR. Some cleaning may require other measures that should be evaluated (e.g. grinding, shot blasting).
  2. Cured: Although Eco-Stain may color cement based products that are not cured, final color may not be realized until 14 – 28 days.
  3. Sound: No system should be placed on concrete or overlays that are flaking or spalling.
  4. Profiled: Not normally required, as SCR is utilized in cleaning.

Note: Eco-Prime is required on substrates are excessively porous, poorly finished, broomed, or very old and absorbent. Eco-Stain will penetrate these unprimed surfaces so deeply that little color will be visible.

Application

Mixing and handling

  1. Eco-Stain’s specialized pigments will settle. Always shake container to mix thoroughly.
  2. Dilute with water to any desired strength, usually between no water dilution to approximately 4 parts water to 1 part Eco-Stain (4:1).
  3. Mask all areas requiring protection. Be certain to mask to an ample height, especially if spraying.

Accenting / Coloring

Due to Eco-Stain's extreme versatility, there are many methods of application, all of which can be combined and altered to suit your needs. The applicator has enormous latitude in selecting methods, particularly since Eco-Stain is non-hazardous.

Common methods include:

  1. Spraying with a pump-up sprayer - Utilize a cone tip and keep sprayer wand in a circular motion to avoid “tracking.”
  2. Brushing or brooming – While Eco-Stain is still wet, brush surface in a random fashion to prevent patterned streaking.
  3. Ragging, sponging, mopping – Usually employed for layering an additional color or spot accenting.
  4. Painter’s airless sprayer – Especially useful in covering large areas.
  5. HVLP or gravity cup sprayer – Precisely places material, utilized with XS products and accenting smaller areas.

Applying multiple coats is optional. Supplementary colors may be combined at desired rates.

Slip Resistance

Eco-Stain alone does not affect slip resistance, but the sealer selected to finish the project will influence this matter: Two recognized US agencies have issued directives on minimum coefficient of friction, OSHA (Occupational Safety and Health Administration) and Department of Justice through the ADA (Americans with Disabilities Act). ADA is the more stringent of the two. ADA directs that accessible walkways have a minimum coefficient of friction of 0.6. Ramps have been directed to be 0.8. The applicator assumes the responsibility to meet these standards. Especially exterior surfaces or surfaces that may become wet, oily, or greasy require attention. Refer to SureGrip Additive TDS and its accompanying coefficient of friction table.

Suitability Sample

Always prepare an adequate number of on-site test areas on the intended substrate to establish aesthetic suitability for products’ intended use.

Clean-up

Eco-Stain can be cleaned up with water.

Full instructions