|
|
| NeoMix D-FRC SprayBlend |
 |
|
NeoMix D-FRC System is a groundbreaking suite of products that yield ultra-thin, high strength decorative pre-cast concrete with precision results. Products include CastingBlend, SprayBlend, BackingBlend, SlurryBlend, Color, and Activator.
NeoMix D-FRC (Decorative Fiber Reinforced Concrete) System is engineered for precast concrete professionals who demand time and labor savings combined with maximum design flexibility including large format capacity.
NeoMix D-FRC SprayBlend is a formulation of portland cement, fibers, and sand. Use NeoMix D-FRC SprayBlend to create flawless countertops, fireplace surrounds, wall panels or floor tile for both interior and exterior application. The fine blend consistency and exceptional workability deliver amazing detail transfer from any mold surface.
PERFORMANCE DETAILS
• Petroleum and Polymer-free
• Immune to freeze thaw damage
• Available in light and dark base for wide range of color possibilities
• Can be as thin as 1/2" thick
• Spray, trowel, brush or roller apply 1/8" thick
• Advanced chemistry allows de-molding 12 hours after casting
• Wide range of casting temperatures, between 40°F - 90°F, without additional considerations
• Hassle free use, consistent results
QUICK LOOK INSTRUCTIONS
Step 1:
Place 25.6 oz of NeoMix Activator into a 8-gallon bucket.
Step 2:
Add 102.4 oz of clean water and color to NeoMix Activator and thoroughly blend.
Step 3:
Add 1/2 sack (25lbs) of SprayBlend into the diluted activator and mix until evenly dispersed using a dual-shaft mixer.
Step 4:
Add 1/4 sack (12.5lbs) of remaining SprayBlend into the diluted activator and mix until evenly dispersed using a dual-shaft mixer.
Step 5:
Add remaining contents of bag to the bucket and thoroughly blend until a consistent "clump-free" mix is achieved.
Step 6:
If needed, an additional 16 oz of clean water can be added to achieve desired consistency.
Packaging: 50 lb bag
Coverage: 50 sf @ 1/8"
Volume Conversion: 137 lbs / cubic foot
SHIPPING NOTE:
NeoMix SprayBlend is shipped via freight. An
additional freight
charge will be calculated after checkout. You will be notified by a
CHENG Concrete associate prior to final payment processing. Please call
510-849-3272 x
221 for further freight details. |
| |
|
|
|
|
|
|
