HALSTA Stepping Stone Molds | Concrete Exchange

Javascript is disabled on your browser.
To view this site, you must enable JavaScript or upgrade to a JavaScript-capable browser.

HALSTA Concrete Stepping Stone Mold

(0) SKU: #MSS-103

$28.95

HALSTA Garden and Stepping Stone Mold is a simple take on the convention of Celtic design—creating interlaced shapes, like these interwoven circles to create a non-linear and knotted pattern.

CHENG Stepping Stone Molds make it easy and affordable to build your very own pathways for the garden and yard. Made of durable polystyrene, these brutes can yield more than 20 castings and each mold includes a set of easy-to-follow instructions for casting and caring for your concrete stepping stone molds.

Each CHENG Exclusive is developed by the CHENG Concrete design team and has been inspired by historical and contemporary design references, art, architecture, and nature. Included with each mold are easy-to-follow instructions and design ideas for stepping stone or paver patterns and layouts.

Choose from six pre-mixed popular CHENG Outdoor Pro-Formula colors or create your own custom concrete color using CHENG SmartColor™.

Stepping Stone Dimensions: 16” x 16” x 2”

Material: 1/8” Polystyrene

How-To Make A Stepping Stone:

Concrete Stepping Stone Instructions: Step 1

Step 1: Prepare Mold

Place mold on plywood base to help move it around.
Brush in a thin coating of mold release (too much might cause air bubbles; too little might make the concrete difficult to de-mold).

Concrete Stepping Stone Instructions: Step 2

Step 2: Mix Concrete

Carefully follow the mixing instructions included with

CHENG Outdoor Pro-Formula.
Avoid a soupy mix by adding water gradually!
The consistency of concrete should be like runny oatmeal.
Wear proper safety equipment.

Concrete Stepping Stone Instructions: Step 3

Step 3: Pour Concrete

Fill bottom surface with 1/2" of concrete and pat it down vigorously to drive out air bubbles.
Lift one edge of the plywood base board and repeatedly tap it up and down to help vibrate the first coat of concrete and draw more air bubbles to the surface. Repeat on all four edges, then fill mold to the top.
Finish by tapping and shaking the plywood base.

Concrete Stepping Stone Instructions: Step 4

Step 4: Cure and De-Mold

Place on a level tabletop.
Cover with painter's plastic and wait 4 days to cure.
After the stone has cured, place a plywood board on top to help flip it over without bending the rim of the mold and then carefully ease off the plastic mold.
Knock down any sharp edges with a diamond hand pad or a garden tool sharpening stone.

No reviews available

Be the first to Write a Review