Order $24.50 or more to qualify for FREE Shipping on eligible items. (Contiguous 48)

Glossy Concrete Countertop Edge Form Tape


About

Put a glossy concrete finish around under-mount sink openings and concrete countertop edges with Surecrete's self-adhesive Glossy Edge Form Tape. This multi-purpose tape is a staple item in any countertop fabrication shop and essential for creating curved edges with any concrete countertop forming system.

You can also re-face worm and damaged form with glossy form tape for longer use and higher quality castings.


Specs

  • Material - 10 mil high-gloss PVC
  • Length - 100 feet

Instructions

How to use Concrete Countertop Edge Form Tape to Make an Under-mount Sink Knockout

Step 1

  • Shape the knockout with a sanding block to insure the edges are a true 90 degrees to the top and bottom.
  • Failure to do this will leave bulges and ripples in the Concrete Countertop Edge Form Tape.


Step 2

  • Place the knockout and Concrete Countertop Edge Form Tape on a flat surface and carefully wrap the knockout with the tape.
  • Create flawless seams by overlapping the tape before slicing through the both layers of tape at the overlap with a sharp razor blade. Peel away the excess sections of tape and the form tape should fit perfectly together at the seam.


Step 3

  • Adhere the sink knockout into the mold with a few dime-sized dabs of silicone.
  • Seal all intersections of form surfaces with 100% silicone sealant using the Corner + Seam Shaping Tools
  • Run a bead of silicone sealant around the top edge of the knockout to prevent concrete from leaking between the Glossy Edge Form Tape and the knockout.


How to Make a Curved Concrete Countertop Edge Form

Step 1

  • Lay-out the curve of your countertop shape with a dry-erase marker.
  • Apply double-sided carpet tape around the perimeter of the countertop shape.
  • Use small sections of carpet tape around the curve to insure maximum tape coverage.


Step 2

  • Apply Concrete Countertop Edge Form Tape to one side of the concrete countertop form.
  • Make sure the form tape is firmly attached to the concrete countertop form.
  • The taped side of the form will be on the outward facing side of the curve.


Step 3

  • Trim the form tape flush with the ends of the Concrete Countertop Forms.
  • Insure that the form tape is firmly adhered to the forms before attempting to bend the curve.


Step 4

  • Seal the entire concrete countertop form with 100% silicone sealant.
  • Roll the countertop form section over so the taped side is on the outward-facing side of the curve.


Step 5

  • Seal the entire concrete countertop form with 100% silicone sealant.
  • Adhere the countertop form in place along the curve. (glossy form tape facing outward).
  • Use drywall screws to hold the countertop forms in place around tight corners.


See More

Glossy Concrete Countertop Edge Form Tape

Quantity must be 1 or more
Regular price
$53.95
Sale price
$53.95

Put a glossy smooth finish on your next concrete project with self-adhesive glossy form tape. Lining your concrete countertop forms will be a breeze with this easy-to-use essential. 

  • Cast high-gloss concrete edges
  • Heavy-duty self-adhesive even sticks to foam
  • 100 feet in each roll
  • Available in four popular sizes: 3/4", 1", 1-1/2", and 2"

About

Put a glossy concrete finish around under-mount sink openings and concrete countertop edges with Surecrete's self-adhesive Glossy Edge Form Tape. This multi-purpose tape is a staple item in any countertop fabrication shop and essential for creating curved edges with any concrete countertop forming system.

You can also re-face worm and damaged form with glossy form tape for longer use and higher quality castings.


Specs

  • Material - 10 mil high-gloss PVC
  • Length - 100 feet

Instructions

How to use Concrete Countertop Edge Form Tape to Make an Under-mount Sink Knockout

Step 1

  • Shape the knockout with a sanding block to insure the edges are a true 90 degrees to the top and bottom.
  • Failure to do this will leave bulges and ripples in the Concrete Countertop Edge Form Tape.


Step 2

  • Place the knockout and Concrete Countertop Edge Form Tape on a flat surface and carefully wrap the knockout with the tape.
  • Create flawless seams by overlapping the tape before slicing through the both layers of tape at the overlap with a sharp razor blade. Peel away the excess sections of tape and the form tape should fit perfectly together at the seam.


Step 3

  • Adhere the sink knockout into the mold with a few dime-sized dabs of silicone.
  • Seal all intersections of form surfaces with 100% silicone sealant using the Corner + Seam Shaping Tools
  • Run a bead of silicone sealant around the top edge of the knockout to prevent concrete from leaking between the Glossy Edge Form Tape and the knockout.


How to Make a Curved Concrete Countertop Edge Form

Step 1

  • Lay-out the curve of your countertop shape with a dry-erase marker.
  • Apply double-sided carpet tape around the perimeter of the countertop shape.
  • Use small sections of carpet tape around the curve to insure maximum tape coverage.


Step 2

  • Apply Concrete Countertop Edge Form Tape to one side of the concrete countertop form.
  • Make sure the form tape is firmly attached to the concrete countertop form.
  • The taped side of the form will be on the outward facing side of the curve.


Step 3

  • Trim the form tape flush with the ends of the Concrete Countertop Forms.
  • Insure that the form tape is firmly adhered to the forms before attempting to bend the curve.


Step 4

  • Seal the entire concrete countertop form with 100% silicone sealant.
  • Roll the countertop form section over so the taped side is on the outward-facing side of the curve.


Step 5

  • Seal the entire concrete countertop form with 100% silicone sealant.
  • Adhere the countertop form in place along the curve. (glossy form tape facing outward).
  • Use drywall screws to hold the countertop forms in place around tight corners.