Order $24.50 or more to qualify for FREE Shipping on eligible items. (Contiguous 48)

Surecrete SureBroom Microcement Concrete Overlay - 45 lb


About

SureBroom is a high strength concrete broom overlay mix, easy for both contractors and homeowners alike. At well over 6000 PSI when cured, this broomable overlay is perfect for heavy traffic areas such as driveways and sidewalks.

Calculator

How many square feet is your project?
*Note: Coverage rate varies based on substrate and application techniques.

Coats 50 lb bags
1 coat
2 coats
3 coats

Specs

VOC Content: 0 g/L

Shelf Life: 1 year in original unopened container

Mixing Ratio: 3-1/2 – 6 quarts water per 45 lb bag

Base Color: Gray

Density: 132 lbs/cubic foot

Compressive Strength ASTM C-109: 6,128 PSI @ 28 days

Flexural Strength ASTM C-78: 1,575 PSI @ 28 days

Tensile Strength ASTM C-190: 910 PSI @ 28 days

Abrasion Resistance ASTM C-944: 1 day – 1 gram lost, seven days- 1 gram lost

Shear Bond ASTM C-882: 1,232 PSI @ 7 days, 1,695 PSI @ 28 days

    Instructions

    1. Any surface receiving a cement-based coating must be clean, cured, sound and profiled.
    2. Make sure that temperatures will remain between 50 and 90 degrees Fahrenheit and that there will be no precipitation in the applied areas for a 48 hour period following application.
    3. Add 3-1/2 – 6 quarts water for every 45 lb bag to a 5 gal bucket and mix in any integral color.
    4. Slowly introduce SureBroom while continuously mixing and mix for a minimum of 1 minute once all product has been emptied into the container. Scrape the sides of the bucket to make sure there are no “dry pockets” that didn’t get mixed properly.
    5. Mist the surface of the concrete with water ahead of any areas about to receive SureBroom.
    6. SureBroom concrete broom overlay can be applied by trowel, squeegee or boom depending upon desired texture.
    7. If you need a second coat of SureBroom concrete broom overlay, simply wait until the surface is properly cured – approx 2-6 hours. A second coat can be applied same as the first coat. Make sure to scrape away excess material from first coat before applying the finish.
    8. Once the concrete broom overlay surface has dried and cured sufficiently (approx 2-6 hours), it can accept stains and secondary colorants, and is also ready to receive a sealer. Typical applications would utilize an acrylic sealer such as Super WB or Colortec Pigmented Acrylic Sealer.


    See More

    Surecrete SureBroom Microcement Concrete Overlay - 45 lb

    Quantity must be 1 or more
    Regular price
    $79.95
    Sale price
    $79.95

    Transform your old, spalled, dull concrete to a freshly-broomed surface with SureBroom. Built for use in high traffic areas, this mix is popular for use on parking decks, driveways, sidewalks, and retail storefronts.

    • For use in high traffic areas
    • Color with pigments or stain
    • Apply with squeegee, trowel, or broom

    About

    SureBroom is a high strength concrete broom overlay mix, easy for both contractors and homeowners alike. At well over 6000 PSI when cured, this broomable overlay is perfect for heavy traffic areas such as driveways and sidewalks.

    Calculator

    How many square feet is your project?
    *Note: Coverage rate varies based on substrate and application techniques.

    Coats 50 lb bags
    1 coat
    2 coats
    3 coats

    Specs

    VOC Content: 0 g/L

    Shelf Life: 1 year in original unopened container

    Mixing Ratio: 3-1/2 – 6 quarts water per 45 lb bag

    Base Color: Gray

    Density: 132 lbs/cubic foot

    Compressive Strength ASTM C-109: 6,128 PSI @ 28 days

    Flexural Strength ASTM C-78: 1,575 PSI @ 28 days

    Tensile Strength ASTM C-190: 910 PSI @ 28 days

    Abrasion Resistance ASTM C-944: 1 day – 1 gram lost, seven days- 1 gram lost

    Shear Bond ASTM C-882: 1,232 PSI @ 7 days, 1,695 PSI @ 28 days

      Instructions

      1. Any surface receiving a cement-based coating must be clean, cured, sound and profiled.
      2. Make sure that temperatures will remain between 50 and 90 degrees Fahrenheit and that there will be no precipitation in the applied areas for a 48 hour period following application.
      3. Add 3-1/2 – 6 quarts water for every 45 lb bag to a 5 gal bucket and mix in any integral color.
      4. Slowly introduce SureBroom while continuously mixing and mix for a minimum of 1 minute once all product has been emptied into the container. Scrape the sides of the bucket to make sure there are no “dry pockets” that didn’t get mixed properly.
      5. Mist the surface of the concrete with water ahead of any areas about to receive SureBroom.
      6. SureBroom concrete broom overlay can be applied by trowel, squeegee or boom depending upon desired texture.
      7. If you need a second coat of SureBroom concrete broom overlay, simply wait until the surface is properly cured – approx 2-6 hours. A second coat can be applied same as the first coat. Make sure to scrape away excess material from first coat before applying the finish.
      8. Once the concrete broom overlay surface has dried and cured sufficiently (approx 2-6 hours), it can accept stains and secondary colorants, and is also ready to receive a sealer. Typical applications would utilize an acrylic sealer such as Super WB or Colortec Pigmented Acrylic Sealer.