Order $24.50 or more to qualify for FREE Shipping on eligible items. (Contiguous 48)

Westcoat TC-3 Medium Texture Cement

TC-3 used in texture coat application @ 7:26


Specs

  • 50 lb. bag
  • Coverage: 150 to 200 sqft. per bag (varies depending on use)
  • Color: gray
  • Mix Ratio: Varies depending on use (Must mix with WP-81 or WP-82 and water)
  • VOC Content: Zero VOC

Instructions

Primer

Mix four gallons of water with one gallon of WP-81 (4 to 1 ratio for a total of 5 gallons) and apply it at a rate of 200-300 square feet per gallon. Roll or spray WP-81 primer over the area to be textured. Only prime areas to be coated the same day. For best results, prime and trowel into damp WP-81 primer. EC-11 Water-Based Epoxy can be used as a primer in place of WP-81 for maximum adhesion. 

Mixing 

Must add WP-81 or WP-82 and water. See specific System Specification Sheet for mixing instructions. 

Coverage 

One 50 pound bag will cover 150 square feet to 200 square feet. Coverage will vary depending on use. See specific System Specification Sheet for detailed coverage information. 

Applying Product 

TC-3 may be troweled, squeegeed, broomed or sprayed. See specific System Specification Sheet for detailed application information.

See More

Westcoat TC-3 Medium Texture Cement

Quantity must be 1 or more
Regular price
$27.95
Sale price
$27.95
This medium texture cement is suitable for interior and exterior surfaces. TC-3 is crafted with specially formulated portland cement, blended with a variety of silica sand and proprietary additives.
  • High strength
  • Good working time
  • Creates a non-skid surface
  • Excellent adhesion to most surfaces
  • Increased water resistance and waterproofing
  • Can be made very flexible
  • Can be tinted

Specs

  • 50 lb. bag
  • Coverage: 150 to 200 sqft. per bag (varies depending on use)
  • Color: gray
  • Mix Ratio: Varies depending on use (Must mix with WP-81 or WP-82 and water)
  • VOC Content: Zero VOC

Instructions

Primer

Mix four gallons of water with one gallon of WP-81 (4 to 1 ratio for a total of 5 gallons) and apply it at a rate of 200-300 square feet per gallon. Roll or spray WP-81 primer over the area to be textured. Only prime areas to be coated the same day. For best results, prime and trowel into damp WP-81 primer. EC-11 Water-Based Epoxy can be used as a primer in place of WP-81 for maximum adhesion. 

Mixing 

Must add WP-81 or WP-82 and water. See specific System Specification Sheet for mixing instructions. 

Coverage 

One 50 pound bag will cover 150 square feet to 200 square feet. Coverage will vary depending on use. See specific System Specification Sheet for detailed coverage information. 

Applying Product 

TC-3 may be troweled, squeegeed, broomed or sprayed. See specific System Specification Sheet for detailed application information.