600GL Blue Bear Coatings Remover
Franmar's most-asked-for product, 600GL, continues to impress contractors with it's ease of use and powerful removal properties. With three times the coverage rate of traditional petroleum removers, 600GL effectively removes multiple layers of topical sealers, acrylics, enamels, urethanes, latex, some epoxies, and other single-component coatings. Made with soybeans, 600GL is a safe, low-odor, non-caustic, green coating remover.
As a leading innovator in green cleaning products, Franmar Chemical, Inc. introduced 600GL as a soy-based paint remover, and changed the industry. 600GL is 100% biodegradable, practically odorless, and is safe for your hands, your work, and your customers.
- Coverage: 75-125 sq. ft. per gallon
- Safe on Concrete, Wood, Masonry, and Metal
- pH Level: 8.1
ApplicationApply a thick layer of 600GL by pouring, brushing, squeegee, or commercial airless sprayer. Applying too thin will cause 600GL to dry out before removal is complete. Use a scraper to check if the coating is softened down to the surface. If not, wait longer and re-check. When the coating is completely softened, remove with a scraper.
Clean UpUse BLUE BEAR 700DG Degreaser or water and a scrub brush, mop, or power washer to clean remaining thin residue. Remove excess coating(s) and 600GL before using a power washer for final cleaning. Allow surface to dry before further preparations.
Usage Tips From The ProsFor large application areas, use a professional airless sprayer or a 4-stage HVLP sprayer.
For tough coating or numerous layers, use a notched 1/2" squeegee or 1/4" gauge rake. Square footage will be greatly reduced.
When used outdoors, cover with a 2mil or thicker plastic to help keep 600GL wet and working.