CX Concrete Countertop Form Walls
Attach CX Form Walls to a melamine coated base with Foam-lok Spray Adhesive.
Line the inner face of the form walls with CX Concrete Countertop Form Liners.
Use CX Corner and Seam Shaping Tools to complete your countertop forms with record breaking speed and ease.
About
When it comes to building concrete countertop forms, we have one piece of advice — Keep It Simple! Save your money for high-quality mixes, reinforcement, sealers, and pigments, not one-time-use forms.
CX Concrete Countertop Form Walls save you time and money. Simply adhere the form walls in place using Foam-Lok™ Spray Adhesive and face with CX Concrete Countertop Edge Form Liners to create a flawless countertop form in minutes.
Use CX Concrete Countertop Form Walls to form curved or straight wall sections that are sturdy enough to handle castings up to 2" thick. You can use the countertop forms for pour-in-place or precast countertops.
Specs
- Package: 16 pieces precut to 48 inches long
- 64 feet of form wall in each carton
- Material: Expanded Polystyrene (EPS) Foam
Instructions
How to use Concrete CX Concrete Countertop Form Walls for a Precast Concrete Countertop
- Step 1
- Adhere the project template to a melamine base with Foam-lok Spray Adhesive
- Step 2
- Remove paper backing from the carpet tape.
- Firmly press the forms into place.
- Make sure the forms are firmly stuck to the carpet tape
- Step 3
- Pre-cut each sections of CX oncrete Countertop Edge Form Liners to fit the form.
- Adhere concrete countertop edge form liners to form.
- Step 4
- Seal the entire concrete countertop form with 100% silicone sealant.
- Use the Corner + Seam Shaping Tools to create precise "round-overs" for all the edges and corners.
How to Make a Curved Countertop Form
- Step 1
- Lay-out the curve of your countertop shape with a dry-erase marker.
- Apply double-sided carpet tape around the perimeter of the countertop shape.
- Use small sections of carpet tape around the curve to insure maximum adhesion surface.
- Step 2
- Apply CHENG Glossy Form Tape to one side of the concrete countertop form.
- Make sure the form tape is firmly attached to the concrete countertop form.
- The taped side of the form will be on the outward facing side of the curve.
- Step 3
- Remove paper backing from the carpet tape.
- Adhere the countertop form in place along the curve. (glossy form tape facing outward)
- Use drywall screws to hold the countertop forms in place around tight corners.
- Step 4
- Seal the entire concrete countertop form with 100% silicone sealant.
- Use the Corner + Seam Shaping Tools to create precise "round-overs" for all the edges and corners.
