Order $24.50 or more to qualify for FREE Shipping on eligible items. (Contiguous 48)

Interstar NStar Non-Reactive Stain for Concrete Floors, Sidewalks and Patios


About

Interstar's NStar Non-Reactive Concrete Stains safely and easily turn plain concrete into vibrant, eye-catching works of art.

The stain bonds to concrete, creating long-lasting, maintenance-free, translucent colors and are available in 24 standard, non-fading colors. (23 are suitable for indoor/outdoor use, and 1, Cornflower Blue, is designed for indoor use only.) 

Specs

  • Protect from freezing
  • Coverage: 1st coat 500 s.f. per gallon, 2nd coat 1,000 s.f. per gallon
  • Packaging: 1 gallon plastic bottle

Instructions

COLORING METHOD

  1. For best results, the stain must penetrate the concrete. Therefore, you must check to see if your concrete is porous. (Place a drop of water on the surface. If it is absorbed into the concrete, the surface is porous and the stain will penetrate. If the water remains sitting on top, the concrete is not porous.)
  2. If the concrete is sealed, remove the sealer with Sealer Remover.
  3. Thoroughly clean the surface with the Surface Prep, CHENG’s mild concrete cleaner, to remove any dust, surface dirt or other contaminants.
  4. Working in circular motions on small areas at a time, apply the stain with the applicator or sprayer.
  5. Closely monitor the concrete surface. As soon as the entire surface is tack-free, apply the 2nd coat. DO NOT apply the second coat until the surface is ENTIRELY tack-free. Waiting too long between coats may result in the 2nd coat not adhering to the first, and the desired result may not be achieved.
  6. When the 2nd coat is tack-free, apply a saeler over the stain and let dry.

IMPORTANT

  • Allow the concrete to cure for a minimum of 28 days before applying NSTAR.
  • Test NSTAR’s color and penetration on a small, inconspicuous area before applying to the entire surface. (Color may vary depending on the condition of the concrete, type of surface, thickness of the coats, experience of the installer, and weather.)
  • Do not use NSTAR where heavy traffic (such as steel wheels) is anticipated.
  • Do not apply stain when temperatures are below 10 °C (50 °F) or above 30 °C (90 °F).
  • Do not dilute NSTAR with water. If dilution is necessary, add NSTAR Dilutor Solution.
  • For best results, apply no more than 2 coats of NSTAR.
  • Blue-based colors should not be used outdoors (these include: Ice Blue, Cornflower Blue, Caribbean Green, Chive, Pea Green and Deep Emerald).
  • Pool-level concentrations of chlorine will not affect the stain, however, if pure chlorine or excessive amounts of chlorinated water touch the surface, wipe it off immediately to avoid discoloration.
See More

Interstar NStar Non-Reactive Stain for Concrete Floors, Sidewalks and Patios

Quantity must be 1 or more
Color
Regular price
$61.95
Sale price
$61.95

NStar Concrete Stain provides 24 vibrant colors that bring long-lasting, maintenance-free, translucent color to your residential and commercial concrete projects.

  • Safe for indoor and outdoor
  • Great for concrete sidewalks, floors, patios, pavers, and more
  • UV resistant and will not fade
  • Environmentally friendly
  • Economical and easy to use

About

Interstar's NStar Non-Reactive Concrete Stains safely and easily turn plain concrete into vibrant, eye-catching works of art.

The stain bonds to concrete, creating long-lasting, maintenance-free, translucent colors and are available in 24 standard, non-fading colors. (23 are suitable for indoor/outdoor use, and 1, Cornflower Blue, is designed for indoor use only.) 

Specs

  • Protect from freezing
  • Coverage: 1st coat 500 s.f. per gallon, 2nd coat 1,000 s.f. per gallon
  • Packaging: 1 gallon plastic bottle

Instructions

COLORING METHOD

  1. For best results, the stain must penetrate the concrete. Therefore, you must check to see if your concrete is porous. (Place a drop of water on the surface. If it is absorbed into the concrete, the surface is porous and the stain will penetrate. If the water remains sitting on top, the concrete is not porous.)
  2. If the concrete is sealed, remove the sealer with Sealer Remover.
  3. Thoroughly clean the surface with the Surface Prep, CHENG’s mild concrete cleaner, to remove any dust, surface dirt or other contaminants.
  4. Working in circular motions on small areas at a time, apply the stain with the applicator or sprayer.
  5. Closely monitor the concrete surface. As soon as the entire surface is tack-free, apply the 2nd coat. DO NOT apply the second coat until the surface is ENTIRELY tack-free. Waiting too long between coats may result in the 2nd coat not adhering to the first, and the desired result may not be achieved.
  6. When the 2nd coat is tack-free, apply a saeler over the stain and let dry.

IMPORTANT

  • Allow the concrete to cure for a minimum of 28 days before applying NSTAR.
  • Test NSTAR’s color and penetration on a small, inconspicuous area before applying to the entire surface. (Color may vary depending on the condition of the concrete, type of surface, thickness of the coats, experience of the installer, and weather.)
  • Do not use NSTAR where heavy traffic (such as steel wheels) is anticipated.
  • Do not apply stain when temperatures are below 10 °C (50 °F) or above 30 °C (90 °F).
  • Do not dilute NSTAR with water. If dilution is necessary, add NSTAR Dilutor Solution.
  • For best results, apply no more than 2 coats of NSTAR.
  • Blue-based colors should not be used outdoors (these include: Ice Blue, Cornflower Blue, Caribbean Green, Chive, Pea Green and Deep Emerald).
  • Pool-level concentrations of chlorine will not affect the stain, however, if pure chlorine or excessive amounts of chlorinated water touch the surface, wipe it off immediately to avoid discoloration.