Westcoat TC-5 Grout Texture Cement
TC-5 used in Slurry Coat (Grout Coat) application @ 9:54
TC-5 is primarily used in conjunction with WP-81 and WP-82 Cement Modifiers and used in several Westcoat Systems. It is mainly used to simulate grout color in Custom Finish Systems. TC-5 is also used for the Broom-On™ System.
- 50 lb. bag
- Coverage: ~100 to 200 sqft. per bag (varies depending on use)
- Color: Gray
- Mix Ratio: Varies depending on use (Must mix with WP-81 or WP-82 and water)
- VOC Content: Zero VOC
Mix four gallons of water with one gallon of WP-81 (4 to 1 ratio for a total of 5 gallons) and apply it at a rate of 200-300 square feet per gallon. Roll or spray WP-81 primer over the area to be textured. Only prime areas to be coated the same day. For best results, prime and trowel into damp WP-81 primer. EC-11 Water-Based Epoxy can be used as a primer in place of WP-81 for maximum adhesion.
Must add WP-81 or WP-82 and water. See specific System Specification Sheet for mixing instructions.
One 50 pound bag will cover 100 square feet to 200 square feet. Coverage will vary depending on use.
TC-5 may be troweled, squeegeed or broomed. See specific System Specification Sheet for detailed application information.See More