Order $24.50 or more to qualify for FREE Shipping on eligible items. (Contiguous 48)

Surecrete Concrete Renovator: SCR - 5 Gallon


About

SCR also has the qualities of a profiling and etching agent like Muriatic Acid without the related harsh acidic properties. It therefore requires NO neutralization, and can simply be rinsed from your surface once finished cleaning. Its friendly properties include cleaning and preparing a wide variety of substrates and surfaces. 

Popular Surfaces That Can Be Cleaned with SCR

  • Concrete Slabs
  • Cement Based Products
  • Concrete Flooring
  • SureCrete Overlays
  • Xtreme Series and D-FRC Castings
  • Stamp Tools and Molds
  • Porcelain

Specs

Instructions

Application

Apply in temperatures above freezing and below 90°F (32°C).


General cleaning of concrete

  1. Dilute SCR 2:1 with water (2 parts water to 1 part SCR)
  2. Dampen concrete with water from mist of pump-up sprayer or garden hose trigger nozzle.
  3. Apply evenly 2:1 diluted product across surface of concrete. Best results are achieved by spraying from a plastic pump-up sprayer.
  4. While still wet with product, scrub concrete with a stiff bristle-broom.
  5. Before SCR can dry, rinse with garden hose or power wash with a fan-tipped pressure washer.


As Surface Preparation on Exterior Concrete

  1. Dilute SCR 2:1 with water (2 parts water to 1 part SCR)
  2. Dampen concrete with water from mist of pump-up sprayer or garden hose trigger nozzle.
  3. Apply evenly 2:1* diluted product across surface of concrete. Best results are achieved by spraying from a plastic pump-up sprayer.
  4. While still wet with product, scrub concrete with a stiff bristle-broom
  5. Before SCR can dry, power wash with minimum 3,000 PSI (21,000 kPa) pressure washer equipped with a turbo-tip.
  6. Note: stronger dilution rates may be required for adequate profile. Some surface preparation may require other measures that should be evaluated (e.g. grinding, shot blasting).


As Surface Preparation on Interior Concrete

  1. Dilute SCR 2:1 with water (2 parts water to 1 part SCR)
  2. Dampen concrete with water from mist of pump-up sprayer or garden hose trigger nozzle.
  3. Apply evenly 2:1* diluted product across surface of concrete. Best results are achieved by spraying from a plastic pump-up sprayer.
  4. While still wet with product, scrub concrete with black pad on a rotational floor machine
  5. Keep floor wet with frequent rinsing.
  6. Mop residue until rinse water is clear or utilize water extraction equipment.
  7. Note: stronger dilution rates may be required for adequate profile. Some surface preparation may require other measures that should be evaluated (e.g. grinding, shot blasting).


Cleaning Overlay Prior to Coloring or Sealing

  1. Dilute SCR 4:1 with water (4 parts water to 1 part SCR)
  2. Dampen concrete with water from mist of pump-up sprayer or garden hose trigger nozzle.
  3. Apply evenly 4:1 diluted product across surface of overlay. Best results are achieved by spraying from a plastic pump-up sprayer.
  4. While still wet with product, gently brush surface with a soft bristle-broom.
  5. Before SCR can dry, gently rinse with garden hose or power wash with a fan-tipped pressure washer.


Prepping XS Precast and XS Face

  1. Dilute SCR 3:1 with water (3 parts water to 1 part SCR)
  2. Wet XS piece with water from pump-up sprayer or sponge.
  3. Brush or sponge 3:1 diluted product onto vertical edges of XS pieces first.
  4. Spray or sponge 3:1 diluted product from plastic pump-up sprayer onto surface.
  5. While still wet with SCR, gently brush surface with a soft bristle brush.
  6. Do not allow diluted product to stand on surface, rinse immediately.


Cleaning Stamping Tools and Molds

  1. Dilute SCR 4:1 with water (4 parts water to 1 part SCR)
  2. Dampen stamping tools or molds with water from mist of pump-up sprayer or sponge.
  3. Spray 4:1 diluted product from plastic pump-up sprayer onto tools or molds.


Suitability Sample

Always prepare an adequate number of on-site test areas on the intended substrate to establish aesthetic suitability for products’ intended use.


Clean Up

Simply rinse with water.


Disposal

Contact your local government household hazardous waste coordinator for information on disposal of unused product.

See More

Surecrete Concrete Renovator: SCR - 5 Gallon

Quantity must be 1 or more
Regular price
$133.95
Sale price
$133.95

Cleans and prepares a wide variety of substrates and surfaces by going into the pores of the concrete and bubbling the impurities out to be rinsed away.

  • Stronger cleaner than citric acid and a safe alternative to muriatic acid
  • Contains no toxic heavy metals or ozone-depleting solvents
  • Cleans 150 square feet
  • Can be sprayed, brushed, or dipped

About

SCR also has the qualities of a profiling and etching agent like Muriatic Acid without the related harsh acidic properties. It therefore requires NO neutralization, and can simply be rinsed from your surface once finished cleaning. Its friendly properties include cleaning and preparing a wide variety of substrates and surfaces. 

Popular Surfaces That Can Be Cleaned with SCR

  • Concrete Slabs
  • Cement Based Products
  • Concrete Flooring
  • SureCrete Overlays
  • Xtreme Series and D-FRC Castings
  • Stamp Tools and Molds
  • Porcelain

Specs

Instructions

Application

Apply in temperatures above freezing and below 90°F (32°C).


General cleaning of concrete

  1. Dilute SCR 2:1 with water (2 parts water to 1 part SCR)
  2. Dampen concrete with water from mist of pump-up sprayer or garden hose trigger nozzle.
  3. Apply evenly 2:1 diluted product across surface of concrete. Best results are achieved by spraying from a plastic pump-up sprayer.
  4. While still wet with product, scrub concrete with a stiff bristle-broom.
  5. Before SCR can dry, rinse with garden hose or power wash with a fan-tipped pressure washer.


As Surface Preparation on Exterior Concrete

  1. Dilute SCR 2:1 with water (2 parts water to 1 part SCR)
  2. Dampen concrete with water from mist of pump-up sprayer or garden hose trigger nozzle.
  3. Apply evenly 2:1* diluted product across surface of concrete. Best results are achieved by spraying from a plastic pump-up sprayer.
  4. While still wet with product, scrub concrete with a stiff bristle-broom
  5. Before SCR can dry, power wash with minimum 3,000 PSI (21,000 kPa) pressure washer equipped with a turbo-tip.
  6. Note: stronger dilution rates may be required for adequate profile. Some surface preparation may require other measures that should be evaluated (e.g. grinding, shot blasting).


As Surface Preparation on Interior Concrete

  1. Dilute SCR 2:1 with water (2 parts water to 1 part SCR)
  2. Dampen concrete with water from mist of pump-up sprayer or garden hose trigger nozzle.
  3. Apply evenly 2:1* diluted product across surface of concrete. Best results are achieved by spraying from a plastic pump-up sprayer.
  4. While still wet with product, scrub concrete with black pad on a rotational floor machine
  5. Keep floor wet with frequent rinsing.
  6. Mop residue until rinse water is clear or utilize water extraction equipment.
  7. Note: stronger dilution rates may be required for adequate profile. Some surface preparation may require other measures that should be evaluated (e.g. grinding, shot blasting).


Cleaning Overlay Prior to Coloring or Sealing

  1. Dilute SCR 4:1 with water (4 parts water to 1 part SCR)
  2. Dampen concrete with water from mist of pump-up sprayer or garden hose trigger nozzle.
  3. Apply evenly 4:1 diluted product across surface of overlay. Best results are achieved by spraying from a plastic pump-up sprayer.
  4. While still wet with product, gently brush surface with a soft bristle-broom.
  5. Before SCR can dry, gently rinse with garden hose or power wash with a fan-tipped pressure washer.


Prepping XS Precast and XS Face

  1. Dilute SCR 3:1 with water (3 parts water to 1 part SCR)
  2. Wet XS piece with water from pump-up sprayer or sponge.
  3. Brush or sponge 3:1 diluted product onto vertical edges of XS pieces first.
  4. Spray or sponge 3:1 diluted product from plastic pump-up sprayer onto surface.
  5. While still wet with SCR, gently brush surface with a soft bristle brush.
  6. Do not allow diluted product to stand on surface, rinse immediately.


Cleaning Stamping Tools and Molds

  1. Dilute SCR 4:1 with water (4 parts water to 1 part SCR)
  2. Dampen stamping tools or molds with water from mist of pump-up sprayer or sponge.
  3. Spray 4:1 diluted product from plastic pump-up sprayer onto tools or molds.


Suitability Sample

Always prepare an adequate number of on-site test areas on the intended substrate to establish aesthetic suitability for products’ intended use.


Clean Up

Simply rinse with water.


Disposal

Contact your local government household hazardous waste coordinator for information on disposal of unused product.