FREE SHIPPING on eligible items when you order $24.50 or more! (48 Contiguous States)

Surecrete WallSpray Vertical Microcement Overlay - 40 lb


About

Surecrete's Wall Spray is a white-cement based overlay containing lightweight aggregates for higher-build and faster installation. Wallspray can either be sprayed or trowel applied to interior and exterior vertical surfaces.  

This product is great for professionals who are looking for a stronger more versatile mix and faster production speeds or homeowners working on DIY projects.

Calculator

How many square feet is your project?
*Note: Coverage rate varies based on substrate and application techniques


Thickness 40 lb bags
1/8"
1/4"
3/8"
1/2"

Specs

Coverage:   Approx 60 square foot @ 1/8″ (Varies based on substrate and application)
VOC Content: 0 g/L
Shelf Life: 1 year in original unopened container
Mixing Ratio: 3.5 – 4 quarts water per 40 lb bag
Density: 121 lbs/cubic foot
Compressive Strength ASTM C-109: 2,870 PSI @ 28 days
Flexural Strength ASTM C-348: 950 PSI @ 28 days
Tensile Strength ASTM C-190: 140 PSI @ 28 days
Abrasion Resistance: 28 days %loss – 500 cycles – less than 0.40%
Mosaic Shear ANSI A 118.4: 275 PSI @ 28 days
Concrete Wall Overlay Water Permeability:   ASTM D2247: Passes Freeze/Thaw @ 50 cycles

    Instructions

    1. Any surface receiving a cementitious coating must be clean, cured, sound and profiled.
    2. Make sure your surface is flat. If in need of patching, we suggest using Wall Stamp to fill large voids on vertical surfaces.
    3. Make sure that temperatures will remain between 50 and 90 degrees Fahrenheit and that there will be no precipitation in the applied areas for a 48 hour period following application.
    4. Add 3-1/2 quarts water for every 40 lb bag to 5 gal bucket and mix in your integral color.
    5. Slowly introduce Wall Spray and mix for a minimum of 1 minute once all product has been emptied into container.
    6. Scrape the inside of the bucket to make sure there are no “dry pockets” of material that have not been mixed correctly.
    7. All exterior applications of Wall Spray are recommended to have a base coat.
    8. Base coats are most commonly sprayed on with compressed air spray equipment, buy may also be applied with hawk and trowel.
    9. Apply with a spray gun using a 1/4″ setting, covering surface completely with a minimum of 1/8″ – 3/16″ build-up of material, leaving no bare spots. Depending on desired finished texture, troweling of applied product can be done now.
    10. Base coat should dry sufficiently (minimum overnight), and surface should be scraped to remove any loose material.
    11. Concrete wall overlay finish coat is applied the same as the base coat described above, with variations only to achieve different desired textures.
    12. Surface can accept stains and secondary colorants at this point and is also ready to receive a sealer. Typical applications would utilize an acrylic sealer such as Super WB or Colortec Pigmented Acrylic Sealer.
    See More

    Surecrete WallSpray Vertical Microcement Overlay - 40 lb

    Quantity must be 1 or more
    Regular price
    $71.95
    Sale price
    $71.95

    Customize your walls and vertical surfaces with Surecrete's lightweight micro-topping overlay and achieve a wide range of textures, colors, and designs. 

    • Lightweight formulation ensures little to no slumping
    • Spray on or trowel apply
    • Great for interior and exterior surfaces
    • Add pigment or stain for unlimited color options

    About

    Surecrete's Wall Spray is a white-cement based overlay containing lightweight aggregates for higher-build and faster installation. Wallspray can either be sprayed or trowel applied to interior and exterior vertical surfaces.  

    This product is great for professionals who are looking for a stronger more versatile mix and faster production speeds or homeowners working on DIY projects.

    Calculator

    How many square feet is your project?
    *Note: Coverage rate varies based on substrate and application techniques


    Thickness 40 lb bags
    1/8"
    1/4"
    3/8"
    1/2"

    Specs

    Coverage:   Approx 60 square foot @ 1/8″ (Varies based on substrate and application)
    VOC Content: 0 g/L
    Shelf Life: 1 year in original unopened container
    Mixing Ratio: 3.5 – 4 quarts water per 40 lb bag
    Density: 121 lbs/cubic foot
    Compressive Strength ASTM C-109: 2,870 PSI @ 28 days
    Flexural Strength ASTM C-348: 950 PSI @ 28 days
    Tensile Strength ASTM C-190: 140 PSI @ 28 days
    Abrasion Resistance: 28 days %loss – 500 cycles – less than 0.40%
    Mosaic Shear ANSI A 118.4: 275 PSI @ 28 days
    Concrete Wall Overlay Water Permeability:   ASTM D2247: Passes Freeze/Thaw @ 50 cycles

      Instructions

      1. Any surface receiving a cementitious coating must be clean, cured, sound and profiled.
      2. Make sure your surface is flat. If in need of patching, we suggest using Wall Stamp to fill large voids on vertical surfaces.
      3. Make sure that temperatures will remain between 50 and 90 degrees Fahrenheit and that there will be no precipitation in the applied areas for a 48 hour period following application.
      4. Add 3-1/2 quarts water for every 40 lb bag to 5 gal bucket and mix in your integral color.
      5. Slowly introduce Wall Spray and mix for a minimum of 1 minute once all product has been emptied into container.
      6. Scrape the inside of the bucket to make sure there are no “dry pockets” of material that have not been mixed correctly.
      7. All exterior applications of Wall Spray are recommended to have a base coat.
      8. Base coats are most commonly sprayed on with compressed air spray equipment, buy may also be applied with hawk and trowel.
      9. Apply with a spray gun using a 1/4″ setting, covering surface completely with a minimum of 1/8″ – 3/16″ build-up of material, leaving no bare spots. Depending on desired finished texture, troweling of applied product can be done now.
      10. Base coat should dry sufficiently (minimum overnight), and surface should be scraped to remove any loose material.
      11. Concrete wall overlay finish coat is applied the same as the base coat described above, with variations only to achieve different desired textures.
      12. Surface can accept stains and secondary colorants at this point and is also ready to receive a sealer. Typical applications would utilize an acrylic sealer such as Super WB or Colortec Pigmented Acrylic Sealer.