FREE SHIPPING on eligible items when you order $24.50 or more! (48 Contiguous States)

SureCrete RESIST Top Coat (5-Gallon)


About

RESIST Top Coat is a blend of 100% methyl and methacrylate polymers used as a superior sealing and protective compound for wear surface aggregate. 

RESIST Top Coat brings out the "wet look" and highlights the natural pigments in the aggregate.


The SureCrete RESIST Epoxy Sand Overlay System

SureCrete’s RESIST is a 100% active, low modulus, two-component epoxy overlay system that when combined with a kiln-dried, properly sourced wear surface aggregate, produces a reliant overlay with benefits not found in traditional concrete overlays.

  • Tenacious bond strength creating a durable, slip-resistant overlay system
  • Superior resiliency and impact / wear resistance
  • Bonds directly with the surface for exceptional chemical resistance and waterproofing
  • Non-shrink and flexible enough to withstand slight movement and extreme temperature changes
  • Cost effective with a 20 year history of high performance, repairs in the most extreme conditions
  • Easy to use 1:1 mixing ratio
  • Complete system that provides compatible products for crack repair, surface defects as well as a non-yellowing, color enhancing, protective top coat

See all of the products in the SureCrete RESIST Epoxy Sand Overlay System

Specs

TECHNICAL DATA INFORMATION
Composition and Materials
A copolymer blend in an exempt solvent solution
Percent Solid
30%
CoverageRESIST Sand Finish 
125-250 sq ft per gallon 

First Coat 
Spray - 175 sq ft per gallon // Roll - 125 sq ft per gallon 

Second Coat 
Spray - 250 sq ft per gallon // Roll - 175 sq ft per gallon

Coverage rates are provided as a guideline only. Many factors including surface texture, porosity and weather conditions will determine actual coverage rates.
Flash Point58° F
Drying TimeTack free: 1-2 hours 
Recoat:  2-4 hours 
Full Cure: 24 hours
VOC Content< 350 g/l
A.I.M. CategoryConcrete Curing Compounds
Maximum VOC350 g/l
Applicable Standards
  • ASTM C-1315, Type 1, Class A, B & C
  • ASTM C-309, Type 1, Class A & B and Type C, 1D with a red dye added
  • Fed. TTC-C-800A, Type 1, Class 1
  • AASHTO Des. M-148, Type 1, Clear - DE CRD - C-300
  • USDA Authorization for use in meat, poultry, and food processing plants
  • Resilient Tile Institute approval for compatibility with most resilient tile, carpet adhesives, and paints

    Instructions

    Surface Prep

    Surfaces must be clean, dry and free of form oils, grease, dust, frost and curing compounds (particularly wax based). Large areas may be blown dust free by compressed air, washed and let dry.  

    Mixing

    The material is ready for use and requires no mixing or dilution. It is unlawful to further dilute with non-exempt solvents. 

    Application

    RESIST Top Coat will enhance color. 

    Apply using a low pressure (30-40lb) sprayer, roller or long nap applicator. Work the sealer into the surface avoiding accumulations, pudding, runs or sags. Because the material is fast drying, it should be applied in small sections while avoiding back rolling into drying areas.

    See More

    SureCrete RESIST Top Coat (5-Gallon)

    Quantity must be 1 or more
    Regular price
    $238.95
    Sale price
    $238.95
    Clear, non-yellowing, high solids solvent-based acrylic sealer that provides additional moisture and chemical resistance.
    • Coating dries clear and does not yellow with age or exposure to ultraviolet rays
    • Provides superior protection against freeze/thaw cycles, deicing salts, and chemical erosion and efflorescence
    • Forms a durable long-lasting film with resistance to water, chemicals, abrasion and stains
    • Highlights and preserves the natural pigments in the surface, adding longevity and sparkle to the finished product
    • Low VOC
    • Does not discolor with over-use
    • Coverage: 175 - 250 sq ft per gallon (based on application method and ambient conditions)

    Attention: Material is considered hazmat, and cannot be shipped air.

    About

    RESIST Top Coat is a blend of 100% methyl and methacrylate polymers used as a superior sealing and protective compound for wear surface aggregate. 

    RESIST Top Coat brings out the "wet look" and highlights the natural pigments in the aggregate.


    The SureCrete RESIST Epoxy Sand Overlay System

    SureCrete’s RESIST is a 100% active, low modulus, two-component epoxy overlay system that when combined with a kiln-dried, properly sourced wear surface aggregate, produces a reliant overlay with benefits not found in traditional concrete overlays.

    • Tenacious bond strength creating a durable, slip-resistant overlay system
    • Superior resiliency and impact / wear resistance
    • Bonds directly with the surface for exceptional chemical resistance and waterproofing
    • Non-shrink and flexible enough to withstand slight movement and extreme temperature changes
    • Cost effective with a 20 year history of high performance, repairs in the most extreme conditions
    • Easy to use 1:1 mixing ratio
    • Complete system that provides compatible products for crack repair, surface defects as well as a non-yellowing, color enhancing, protective top coat

    See all of the products in the SureCrete RESIST Epoxy Sand Overlay System

    Specs

    TECHNICAL DATA INFORMATION
    Composition and Materials
    A copolymer blend in an exempt solvent solution
    Percent Solid
    30%
    CoverageRESIST Sand Finish 
    125-250 sq ft per gallon 

    First Coat 
    Spray - 175 sq ft per gallon // Roll - 125 sq ft per gallon 

    Second Coat 
    Spray - 250 sq ft per gallon // Roll - 175 sq ft per gallon

    Coverage rates are provided as a guideline only. Many factors including surface texture, porosity and weather conditions will determine actual coverage rates.
    Flash Point58° F
    Drying TimeTack free: 1-2 hours 
    Recoat:  2-4 hours 
    Full Cure: 24 hours
    VOC Content< 350 g/l
    A.I.M. CategoryConcrete Curing Compounds
    Maximum VOC350 g/l
    Applicable Standards
    • ASTM C-1315, Type 1, Class A, B & C
    • ASTM C-309, Type 1, Class A & B and Type C, 1D with a red dye added
    • Fed. TTC-C-800A, Type 1, Class 1
    • AASHTO Des. M-148, Type 1, Clear - DE CRD - C-300
    • USDA Authorization for use in meat, poultry, and food processing plants
    • Resilient Tile Institute approval for compatibility with most resilient tile, carpet adhesives, and paints

      Instructions

      Surface Prep

      Surfaces must be clean, dry and free of form oils, grease, dust, frost and curing compounds (particularly wax based). Large areas may be blown dust free by compressed air, washed and let dry.  

      Mixing

      The material is ready for use and requires no mixing or dilution. It is unlawful to further dilute with non-exempt solvents. 

      Application

      RESIST Top Coat will enhance color. 

      Apply using a low pressure (30-40lb) sprayer, roller or long nap applicator. Work the sealer into the surface avoiding accumulations, pudding, runs or sags. Because the material is fast drying, it should be applied in small sections while avoiding back rolling into drying areas.