Order $24.50 or more to qualify for FREE Shipping on eligible items. (Contiguous 48)

Surecrete SureStamp Stampable Microcement Overlay - 50 lb


About

SureCrete's SureStamp is a stampable overlay designed for interior and exterior use. Unlike other stamp overlay products, SureStamp can be applied on existing slabs as thin as 1/4" for a variety of textured finishes.

Calculator

How many square feet is your project?
Tip: multiply the length (in feet) by the width (in feet)

Thickness 50 lb bags
1/4"
3/8"
1/2"

Specs

Coverage: 15-18 square foot @ 3/8″; 20-24 square foot @ 1/4″

VOC Content: 0 g/L

Shelf Life: 1 year in original unopened container

Mixing Ratio: 3.5–4 quarts water per 50 lb bag

Base Color: White

Density: 132 lbs/cubic foot

Compressive Strength ASTM C-109: 4,350 PSI @ 28 days

Flexural Strength: ASTM C-348 945 PSI @ 28 days

Tensile Strength: ASTM C-190 440 PSI @ 28 days

Abrasion Resistance: ASTM D-4060 less than 0.55% @ 28 days

T-BAR Adhesion (Durock): 190.3 PSI @ 28 days

Shear Strength: ANSI A-118.4 280 PSI @ 28 days

    Instructions

    1. Any surface receiving a cementitious coating must be clean, cured, sound and profiled.
    2. Make sure that temperatures will remain between 50 and 90 degrees Fahrenheit and ensure there will be no precipitation in the applied areas for a 48 hour period following application.
    3. Add approximately 3.5 quarts of water for every 50 lb bag to a 5 gal bucket and your desired integral color.
    4. Slowly introduce SureStamp while continuously mixing and mix for a minimum of 1 minute. Once all product has been emptied, scrape the sides of the bucket to make sure there are no “dry pockets” that were not mixed properly.
    5. Mist the surface of the concrete with water ahead of any areas about to receive SureStamp stamp overlay.
    6. Before SureStamp can be applied, a coating of SureBond must be put down to ensure proper adhesion of the finished surface. Pour a generous ribbon of SureBond onto the surface and spread with squeegee over an area that corresponds to your next workable area of SureStamp.
    7. While the SureBond is still wet, pour the mixed SureStamp onto the surface.
    8. Gauge rake the product to the appropriate height for selected texture/carving pattern (usually between 1/4″ and 3/8″).
    9. Smooth the surface of product with a metal squeegee or similar tool.
    10. Allow product to begin to dry, yet remain plastic. The surface will lose its wet sheen and yield to the touch.
    11. The surface is now ready to receive a stamp pattern or custom carving. Be sure to use a releasing agent on any tools used to manipulate the surface, and to clean releasing agents off of finished surface before next step.
    12. Once the surface has dried and cured sufficiently (approx 6-8 hours), it can accept stains and secondary colorants and is also ready to receive a sealer. Typical outdoor applications would utilize an acrylic sealer such as Super WB, HS 200, HS 300, or Colortec Acrylic Sealers.


    See More

    Surecrete SureStamp Stampable Microcement Overlay - 50 lb

    Quantity must be 1 or more
    Regular price
    Sold out
    Sale price
    $49.95

    Pool decks, patios, sidewalks, and driveways are just the beginning of stamp concrete with SureStamp. Use your favorite stamps as thin as 3/8" for unlimited texture designs.

      About

      SureCrete's SureStamp is a stampable overlay designed for interior and exterior use. Unlike other stamp overlay products, SureStamp can be applied on existing slabs as thin as 1/4" for a variety of textured finishes.

      Calculator

      How many square feet is your project?
      Tip: multiply the length (in feet) by the width (in feet)

      Thickness 50 lb bags
      1/4"
      3/8"
      1/2"

      Specs

      Coverage: 15-18 square foot @ 3/8″; 20-24 square foot @ 1/4″

      VOC Content: 0 g/L

      Shelf Life: 1 year in original unopened container

      Mixing Ratio: 3.5–4 quarts water per 50 lb bag

      Base Color: White

      Density: 132 lbs/cubic foot

      Compressive Strength ASTM C-109: 4,350 PSI @ 28 days

      Flexural Strength: ASTM C-348 945 PSI @ 28 days

      Tensile Strength: ASTM C-190 440 PSI @ 28 days

      Abrasion Resistance: ASTM D-4060 less than 0.55% @ 28 days

      T-BAR Adhesion (Durock): 190.3 PSI @ 28 days

      Shear Strength: ANSI A-118.4 280 PSI @ 28 days

        Instructions

        1. Any surface receiving a cementitious coating must be clean, cured, sound and profiled.
        2. Make sure that temperatures will remain between 50 and 90 degrees Fahrenheit and ensure there will be no precipitation in the applied areas for a 48 hour period following application.
        3. Add approximately 3.5 quarts of water for every 50 lb bag to a 5 gal bucket and your desired integral color.
        4. Slowly introduce SureStamp while continuously mixing and mix for a minimum of 1 minute. Once all product has been emptied, scrape the sides of the bucket to make sure there are no “dry pockets” that were not mixed properly.
        5. Mist the surface of the concrete with water ahead of any areas about to receive SureStamp stamp overlay.
        6. Before SureStamp can be applied, a coating of SureBond must be put down to ensure proper adhesion of the finished surface. Pour a generous ribbon of SureBond onto the surface and spread with squeegee over an area that corresponds to your next workable area of SureStamp.
        7. While the SureBond is still wet, pour the mixed SureStamp onto the surface.
        8. Gauge rake the product to the appropriate height for selected texture/carving pattern (usually between 1/4″ and 3/8″).
        9. Smooth the surface of product with a metal squeegee or similar tool.
        10. Allow product to begin to dry, yet remain plastic. The surface will lose its wet sheen and yield to the touch.
        11. The surface is now ready to receive a stamp pattern or custom carving. Be sure to use a releasing agent on any tools used to manipulate the surface, and to clean releasing agents off of finished surface before next step.
        12. Once the surface has dried and cured sufficiently (approx 6-8 hours), it can accept stains and secondary colorants and is also ready to receive a sealer. Typical outdoor applications would utilize an acrylic sealer such as Super WB, HS 200, HS 300, or Colortec Acrylic Sealers.